Binah Team - How to install and use

Pre-requisite

In order for you to follow the instructions given on this article, you must get an invitation from our sales team to start using Binah team. In case you have not received one, please contact our sales team to get the invitation and start testing our app.

Once our team has confirmed that an invitation was sent to your account and you have not received an email right away, please check your spam folder and mark the email as "not spam". Please refer to the Android - Issues and problems (How to avoid Binah emails being marked as spam) for more information.

Installing Binah team

Note!

Before installing Binah team, please make sure that you have done the steps below:

  • Close all Chrome tabs
  • Install from unknown sources setting is enabled
  • "Ask where to save files" settings is also enabled

Please refer to the  Android - Issues and problems  section of this article for the steps on how to enable the settings mentioned above or if you encounter any errors in installing the application.


 

Installation steps

1.  You will receive an invitation via email with login credentials for your first login. 

2.  Download the application using the link in the invitation email or by searching “Binah Team” in the store. Please note that you must download the correct application based on your device's operating system links (iOS or Android) for both OS that are provided in the invitation email.

donwload_link.PNG

3.  After installing the app, open it and login using the credentials given on the invitation email

mceclip0.png

4.  Sign consent to the user agreement.

5.  Replace the temporary password with a permanent password, and add profile details. Refer to this link for the steps on how to reset your password.

mceclip1.png

6.  Review the information on how to use the application as well as the best practices for taking a measurement

7.  You are now logged into the system.


Managing your account


How to reset my password?

1.  Tap Forgot Password on the login page.

2.  Enter your email address and tap on the "Reset Password" button

mceclip2.pngmceclip3.png

3.  You will receive a password reset email from Binah.ai. Click/tap the "Reset Password" button in the email and enter your new password.

4.  Now you can login to Binah using your new password


How to update my profile details?

1.  Tap the       icon to open the left-side menu.

2.  Tap Profile

3.  Modify your profile details

mceclip4.png

4.  Tap Save Changes


How to log out from my current user?

1.  Tap the       icon to open the left-side menu.

2.  Tap Profile

3.  Tap Logout

mceclip5.png


How to delete my account?

1.  Tap the       icon to open the left-side menu.

2.  Tap Settings

3.  Tap Delete Account. Please note that the user’s license, measurements, personal, and usage information data can't be retrieved

delete_account.png

 


How to use the app



Note:

Please make sure that the battery level of the device is above 20%. We also highly suggest that you follow our best practices in using the application while taking your measurements for best results.

How to take a measurement using rPPG (via face)?

1. Open the application and make sure that your face is within the device's  front-facing camera view

2. Check that your battery level is above 20% and the device is not in power-save mode.

3.  Tap the "blue heart" button to start the measurement

mceclip7.png

4.  Face detection box will show up as soon as the measurement starts. Momentary values will also be shown after a few seconds into the test

mceclip8.png

5.   Look at the camera and minimize movements until measurement is complete. You can track the progress of the measurement via the progress bar shown at the bottom of your screen

6.  You can also manually stop the measurement via the "stop" button that is located on the upper-right side of your screen

7.  A final report will be shown once the measurement has been completed.

mceclip9.png


Note:

Please make sure that the battery level of the device is above 20%. We also highly suggest that you follow our best practices in using the application while taking your measurements for best results.

How to take a measurement using the PPG method (via finger)?

1. Check that your battery level is above 20% and the device is not in power-save mode.

2.  Open the application and click on the "use finger" button located on the upper-right side of your screen

3.  Place your index finger on the back camera, applying moderate pressure

a.  iOS - The finger completely covers both the rear camera and the rear flashlight.

b.  Android - The finger completely covers the rear camera and does not cover the rear flashlight.

4.  Tap on the "Start" button to start the measurement

mceclip10.png

5.  Momentary values will be shown seconds after starting the measurement. Please make sure that your finger stays on the camera lens during the measurement. You can check the progress of the measurement below your screen

mceclip11.png

6.  A final report will be shown once the measurement has been completed.

 


How to open How to use the app pages?

1.  Tap the       icon to open the left-side menu.

2.  Tap "Settings".

3.  Tap "How to use the app".

4.  Swipe to move between the "how to use" pages.


How to send us an Email?

1.  Tap the       icon to open the left-side menu.

2.  Tap "Settings".

3.  Tap "Send us an email".

4.  Send a feedback email to [email protected].

 


Managing your data


How to share measurement results?

1.  After the measurement, a Results page should be displayed (hint: you can also share previous results by opening them from the history section). 

2.  Tap a share button for a specific vital sign to share only this result, or tap the Share button on the top right corner to share all measurement results. 

3.  Choose an application for sharing the result. 

4.  Send the result via those applications.


How to discard the last measurement results?

1.  After the measurement, a Results page should be displayed. 

2.  Tap Discard Results to discard the results without saving them in the historical archive.

discard.png


How to open the history measurement trend view?

1.  Tap the       icon to open the left-side menu.

2.  Tap History.

3.  Choose a range (via the trend view you will see the first results of each day).

  hist1.PNG

4.  Tap the       button to read information on a vital sign.

  hist2.png


How to open the measurement results log?

1.  Tap the       icon to open the left-side menu

2.  Tap History

3.  Tap Logs

4.  Tap on a specific result to display all measurement results

  logs.pngmceclip12.png

5.  Tap the       button to read information on a vital sign


How to read information about the measured vital signs?

1.  Tap the       icon to open the left-side menu

2.  Tap Information (hint: you can tap the    button in the different results pages to read information about a specific vital sign).


How to delete history measurement results? 

1.  Tap the       icon to open the left-side menu

2.  Tap History

3.  Tap Logs

4.  Tap on a specific result to display all measurement results

  delete1.PNG

5.  Tap Delete Results

  delete2.png

How to check Binah Team and SDK version used


1.  Tap the       icon to open the left-side menu.

2.  Go to the "About us" page

3.  The Binah Team version and the SDK used for the application is shown on the top of the page

Screenshot_20201121-212023.jpg

How to integrate Apple healthKit (iOS)?


1.  Tap the       icon to open the left-side menu.

2.  Tap Settings

3.  Tap the Apple HealthKit option

  apl_hlt1.png

3.  If the Allow switches are off for the vital signs, follow the instructions below:

4.  Tap on the Health app button.

  apl_hlt2.png

5.  Tap your profile picture in the upper-right corner.

6.  Under Privacy tap Apps.

7.  Tap on the Binah Team app row and turn on the health categories that you want the app to measure.

  apl_hlt3.png


Common issues and solutions:

Android - Issues and problems
Minimum requirements for using Android devices:
Our Mathematical engine needs a good performance of the device but first of all you have to verify that your device has:
    • API level higher than 27
Note:

Sometimes your Android version can be 8.1 but based on a lower API level

  • CPU (instruction sets) of an arm64-v8a
How can I know my device real properties?
  1. You should download the application "Hardware info" which can be found here: Hardware info
  2. After installing, open the APP and expand the "System" tab and look for the API Level. 

    IMG-20201101-WA0015.jpg

  3. To show your CPU, expand the "Processor" section and look for the "Instruction Sets"

    IMG-20201101-WA0016.jpg

My application is running but I am getting many warnings and errors.
To work with our application you must follow our best practices flow which can be found here: Best practices
I am following your best practices but still test stops every time.
In this case, your device does not have many performance points.
To verify that you can go to this performance site and verify your device's score is above 300.

 

How to avoid Binah emails from being marked as spam

Since there are some cases wherein Binah email invitations are being marked as Spam, please do the following to avoid this from happening again:

1.  Go to your Spam folder and if you found the Binah email on that folder, mark it as "not spam"

-  This helps your ISPs incoming mail filter to avoid marking the Binah emails as a spam

2. "Add us to your address book" - add our email address to your inbox or trusted senders list. By doing this, your email provider will not mark our email as Spam. You can follow this instructional video for the steps on how to do this on Gmail

3. "Star or Mark our email as Important" - A simple inbox action such as Starring an email or marking it as important can help tell the email providers that you want to receive emails from that specific address

Untitled.png

Enabling installation from unknown sources

Steps

1.  Go to your Android device's Settings

2. Then go to the "Apps & Notifications" section

1.jpg

3. Select the "Special app access" and tap on the "Install unknown apps"

Group_1.png

4. Tap on "Chrome" and enable the "Allow from this source" setting

Screenshot_20201207-180101.jpg

Enabling "Ask where to save files" settings

Steps

1.  Open your Chrome application and go to the Settings

2. Under the "Advanced" section tap on "Downloads"

1.jpg

3. Activate the "Ask where to save files" setting

2.jpg

What to do if you were not able to receive the invitation email from Binah team

Why does this happen?

There are some cases wherein client's organization mail server configurations or firewall configurations might block emails from external domains.

There are 2 ways that we have identified to workaround this issue and they are as follows:

1.  We highly suggest you to work with your IT manager to enable the ability to receive application invitation. This way, all of our invitations to the client's organizational domain will get through.

2. We can send the Binah invitation to your personal email and install it from there

How to take a screenshot/Record your screen

Android:


How to take a screenshot:

1.  Open the screen that you want to capture.

2. Depending on your phone:

  • Press the Power and Volume down buttons at the same time.
  • If that doesn’t work, press and hold the Power button for a few seconds. Then tap Screenshot.

3. At the bottom left, you’ll find a preview of your screenshot. On some phones, at the top of the screen, you'll find Screenshot capture


How to record your screen:

1.  Swipe down twice from the top of your screen.

2.  Tap Screen record

  • You might need to swipe right to find it.
  • If it's not there, tap Edit and drag Screen record to your Quick Settings.

Screenshot_20201226-180139.jpg

3.  Choose what you want to record and tap Start. The recording begins after the countdown.

4.  To stop recording, swipe down from the top of the screen and tap the Screen recorder notification .

Screenshot_20201226-180504.jpg

Please go to this link to know about the steps on how to record or take a screenshot from your Android device


IOS:


How to take a screenshot:

1.  Do one of the following:

  • On an iPhone with Face ID: Simultaneously press and then release the side button and volume up button.
  • On an iPhone with a Home button: Simultaneously press and then release the Home button and the side button or Sleep/Wake button (depending on your model).

2.  Tap the screenshot in the lower-left corner, then tap Done.

3.  Choose Save to Photos, Save to Files, or Delete Screenshot.

4.  If you choose to Save to Photos, you can view it in the Screenshots album in the Photos app, or in the All Photos album


How to record your screen:

1.  Go to Settings > Control Center, then tap the Insert Screen Recording button next to Screen Recording.

2.  Open Control Center, tap the Screen Recording button, then wait for the three-second countdown.

3.  To stop recording, open Control Center, tap the Selected Screen Recording button or the red status bar at the top of the screen, then tap Stop.

4.  Go to Photos , then select your screen recording.

Kindly visit this link to know more about the steps on how to record/take a screenshot of you iOS device

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.